基于动平台多源数据的运动目标测量方法研究

根据运动目标性能试验需求及试验平台的特点,建立一个影像数据测量系统,实现目标的运动视频记录和外部参数测量。采用基于OpenCV的棋盘格内参数标定结合基于平台上固定标识点、线为基准的外场标定的摄像机标定方法,采用高速影像数据、中线视频数据和GPS数据相结合的方法实现目标运动的轨迹、姿态等参数的测量。通过测量精度分析及多次试验结果证明,测量精度达到水平方向优于10 cm,高程方向优于5 cm,姿态精度优于05。     

高架桥声屏障高度对列车气动特性影响的数值模拟

采用计算流体力学方法对高架桥声屏障高度影响高速列车空气动力特性进行数值研究.通过网格划分、湍流模型选取、边界条件设置等来提高数值计算精度.结果表明,当高速列车运行在下风向时,头车、中间车上的侧向力随着声屏障高度增加而逐渐下降.头车所受的侧翻力矩在整车中最大,且随着声屏障高度的增加而逐渐减小.随着声屏障高度的增加,上风向工况下中间车受到的侧翻力矩要大于下风向工况.上、下风向工况下高速列车气动特性差异主要是由于流动空腔中列车所处的相对位置不同,改变了车体表面的压力分布,从而改变了车体所受到的气动力、力矩.     

A Control Simulation Method of High-Speed Trains on Railway Network with Irregular Influence

Based on the discrete time method, an effective movement control model is designed for a group of high-speed trains on a rail network. The purpose of the model is to investigate the specific traffic characteristics of high-speed trains under the interruption of stochastic irregular events. In the model, the high-speed rail traffic system is supposed to be equipped with the moving-block signalling system to guarantee maximum traversing capacity of the railway. To keep the safety of trains' movements, some operational strategies are proposed to control the movements of trains in the model, including traction operation, braking operation, and entering-station operation. The numerical simulations show that the designed model can well describe the
movements of high-speed trains on the rail network. The research results can provide the useful information not only for investigating the propagation features of relevant delays under the irregular disturbance but also for rerouting and rescheduling trains on the rail network.     

轧辊用高钒高速钢的滚-滑动磨损性能及失效行为研究

在高应力滚-滑动(滑动率约10%)条件下,利用自制的磨损试验机研究了高钒高速钢的磨损性能,并利用电子显微镜分析了失效行为.结果表明:高钒高速钢的相对耐磨性是高铬铸铁(Cr20)的2倍以上.磨损失效形式为显微切削与疲劳剥落的复合,兼有碳化物碎裂.碳化物对磨损失效有重要作用,高铬铸铁中的杆状M7C3型碳化物易于弯曲、碎裂而在其内部形成大量裂纹,促进磨损表面产生大块的疲劳剥落;高钒高速钢中团块状VC硬度高、形态好、具有精细亚结构、不易碎裂,可有效地抵御显微切削和疲劳剥落,是高钒高速钢耐磨性优良的原因.     

高速逆流色谱分离纯化蔓荆子中的活性成分

应用高速逆流色谱法(HSCCC)分离纯化蔓荆子中的活性成分。以石油醚-乙酸乙酯-甲醇-水(体积比为3:6:3.6:3)为两相溶剂体系,在转速为800 r/min、流速为1.5 mL/min、检测波长为254 nm的条件下进行分离,所得馏分经高效液相色谱法(HPLC)检测,并经电喷雾电离(ESI)质谱和核磁共振谱(NMR)鉴定化合物的结构。从250 mg蔓荆子粗提物中一次性分离得到4个化合物,分别为23 mg对羟基苯甲酸、15 mg 3,6,7-三甲基槲皮万寿菊素、24 mg蔓荆子黄素和5 mg蒿黄素,其纯度约为93.1%、 97.3%、 98.7%和98.5%。该法具有简便、快速、重复性好的优点,为分离蔓荆子中的活性成分提供了新的方法。     

Finite-Difference Lattice Boltzmann Scheme for High-Speed Compressible Flow: Two-Dimensional Case

Lattice Boltzmann (LB) modeling of high-speed compressible flows has long been attempted by various authors. One common weakness of most of previous models is the instability problem when the Mach number of the flow is large. In this paper we present a finite-difference LB model, which works for flows with flexible ratios of specific heats and a wide range of Mach number, from $0$ to 30 or higher. Besides the discrete-velocity-model by Watari [Physica A 382 (2007) 502], a modified Lax--Wendroff finite difference scheme and an artificial viscosity are introduced. The combination of the finite-difference scheme and the adding of artificial viscosity must find a balance of numerical stability versus accuracy. The proposed model is validated by recovering results of some well-known benchmark tests: shock tubes and shock reflections. The new model may be used to track shock waves and/or to study the non-equilibrium procedure in the transition between the regular and Mach reflections of shock waves, etc.     

动荷载作用下高速铁路风积土地基动力特性试验研究

根据辽西地区的地震资料和波速测试资料,通过动三轴试验,进行了地震冲击荷载和列车振动荷载两种动荷载作用下辽西风积土地基的动力特性试验研究。研究结果表明,风积土的动强度、动变形和动模量等指标与荷载类型、持续时间、振动频率和动应力幅值等条件有关。在地震荷载作用下,动荷载频率和动应力幅值越大、震动持续时间越长,其产生的动应变越大;在高速列车振动荷载作用下,土的动强度和动抗剪强度随振动次数的增加而降低;固结比相同时,动弹性模量Ed和动剪切模量Gd随固结压力的增大而增大;随动应变εd的增大而减小,且初始时刻减小速度明显,之后逐渐变缓。     

A Simple and Efficient Two-Dimensional High-Speed Counter-Current Chromatography Linear Gradient and Isocratic Elution Modes for the Preparative Separation of Coumarins from Roots of Toddalia asiatica (Linn.) Lam.

Toddalia asiatica (L.) Lam. (Rutaceae) has shown a broad spectrum of biological properties, such as anti-inflammatory, antioxidant, antimicrobial, anti-HIV, and anticancer properties. The present study is concerned with the separation of the main components with broad partition coefficients (K_D values) from T. asiatica, using linear gradient high-speed counter-current chromatography (LGCCC) combined with an off-line two-dimensional (2D) mode. Similar to the binary gradient HPLC, the LGCCC mode is operated by the adjustment of the proportion between the mobile phase of 5:5:1:9 (v/v) (pump A) and 5:5:4.5:5.5 (v/v) (pump B) in an n-hexane/ethyl acetate/methanol/water solvent system. The off-line 2D-CCC mode was used in this study for the secondary separation of two similar K_D value compounds with n-hexane/ethyl acetate/methanol/water (5:5:4:6, v/v). Notably, six coumarins, namely, tomentin (1), toddalolactone (2), 5,7,8-trimethoxycoumarin (3), mexoticin (4), isopimpinellin (5), and toddanone (6), were efficiently separated. The structures of the pure compounds were elucidated by spectral techniques and compared with the literature.     

APPLICATIONS AND CHALLENGES OF STRUCTURAL OPTIMIZATION IN HIGH-SPEED AEROCRAFT 1)

高速飞行器是航空航天领域发展的重要方向,具有重大战略意义和重要经济社会价值。首先,对结构优化技术及其在飞行器零部件和全机结构概念设计中的应用进行综述;然后,根据典型使用环境和设计要求,总结高速飞行器结构设计中存在的主要问题和应用需求,着重介绍近年来在高速飞行器零部件和全机结构概念设计中应用结构优化技术的典型案例;最后,提出近期亟待突破或完善的结构优化技术。结构优化技术与设计经验相结合带来设计理念的变革,将成为先进飞行器设计的必备工具和标准流程。面向重大需求的结构优化理论研究与工程实践对提升我国航空航天核心竞争力具有重要价值。     

Robust tensor train component analysis

Robust Principal Component Analysis plays a key role in various fields such as image and video processing, data mining, and hyperspectral data analysis. In this paper, we study the problem of robust tensor train (TT) principal component analysis from partial observations, which aims to decompose a given tensor into the low TT rank and sparse components. The decomposition of the proposed model is used to find the hidden factors and help alleviate the curse of dimensionality via a set of connected low-rank tensors. A relaxation model is to minimize a weighted combination of the sum of nuclear norms of unfolding matrices of core tensors and the tensor ${?}_1$ norm. A proximal alternating direction method of multipliers is developed to solve the resulting model. Furthermore, we show that any cluster point of the convergent subsequence is a Karush-Kuhn-Tucker point of the proposed model under some conditions. Extensive numerical examples on both synthetic data and real-world datasets are presented to demonstrate the effectiveness of the proposed approach.